Ancon Wall Ties & Restraint Fixings
Wall ties and restraint fixings are an essential element in the stability of masonry cladding. The ANCON range includes solutions for all types of construction, including standard blockwork, timber frames and steel studwork.
Ancon M6 Single Expansion Bolts are recommended for fixing to concrete, set screws or self-drilling screws for steelwork, and suitable plugs and screws for fixing to masonry. SDV ties fixed to steelwork or concrete at the lowest point of the slot will have a safe working load of approximately 1kN.
Head of the tie. Ancon ties are produced in lengths from 150mm for masonry-to-masonry ties, and 75mm for masonry-to-concrete ties, in increments of 25mm. Drips will usually be positioned 90mm from the outer end of the tie. Masonry-to-masonry ties can also be supplied with a central drip. Special wall ties with a. The sliding tie can be provided with a hole (IHR-B) or slot (IHR-V) to suit M8 bolts, with a notch end to fix directly into a 38/17 or 30/20 cast-in channel (IHR-C), and with a notch end to suit the Hammer-On section that attaches to a steel flange without site drilling (IHR-H). Ancon PP21, 125mm wall ties with debonding sleeves. 10mm Gap Debonding sleeves should be pulled back 10mm to allow expansion as well as contraction of brickwork Ancon ST1 wall tie. Ancon SD21 wall.
Ancon ST1
This heavy duty Type 1 stainless steel wall tie is now available in 7 lengths to suit cavities from 50mm to 225mm. It is CE marked and available ex-stock from SIG in boxes of 250 ties.
Frame Cramps
Frame cramps are an ideal solution where a restraint isrequired between masonry and in-situ structures. They can be fixed to a rangeof materials including concrete, steelwork and masonry.
Ancon SDB Frame Cramps used as cavity wall ties exceed therequirements of a Type 2 tie to PD 6697 for lengths up to 300mm. They have a7mm diameter hole to suit a range of fixings.
Ancon SDV Frame Cramps have an 8mm x 30mm vertical slot thatallows vertical fixing position adjustment where required.
Frame cramps can be fixed to masonry with suitable plugs and screws or resin anchors.
Channel Ties
Ancon wall ties can also be used with our 25/14, 28/15,30/20, 38/17, 36/8 and 40/25 channels.
30/20 Channel is supplied with anchors for casting into concrete. 25/14 and 36/8 Channels are supplied plain-backed for surface fixing.
Ancon Wall Ties & Restraint Fixings
Wall ties and restraint fixings are an essential element in the stability of masonry cladding. The ANCON range includes solutions for all types of construction, including standard blockwork, timber frames and steel studwork.
Ancon ST1
This heavy duty Type 1 stainless steel wall tie is now available in 7 lengths to suit cavities from 50mm to 225mm. It is CE marked and available ex-stock from SIG in boxes of 250 ties.
Frame Cramps
Frame cramps are an ideal solution where a restraint isrequired between masonry and in-situ structures. They can be fixed to a rangeof materials including concrete, steelwork and masonry.
Ancon SDB Frame Cramps used as cavity wall ties exceed therequirements of a Type 2 tie to PD 6697 for lengths up to 300mm. They have a7mm diameter hole to suit a range of fixings.
Ancon Slot Ties Meaning
Ancon SDV Frame Cramps have an 8mm x 30mm vertical slot thatallows vertical fixing position adjustment where required.
Frame cramps can be fixed to masonry with suitable plugs and screws or resin anchors.
Channel Ties
Ancon Slot Ties Game
Ancon wall ties can also be used with our 25/14, 28/15,30/20, 38/17, 36/8 and 40/25 channels.
Ancon Slot Ties Track
30/20 Channel is supplied with anchors for casting into concrete. 25/14 and 36/8 Channels are supplied plain-backed for surface fixing.